ATI Advanced TechInstallations Book a Site Review

Electrical

Commercial Solar Cable Sizing and Voltage Drop Explained

Guide · Commercial solar & battery · ~5 min read

Cable sizing isn't the glamorous part of a commercial solar install, but get it wrong and you'll quietly leak energy and risk compliance problems for the life of the system. Here's how we think about cable sizing and voltage drop on commercial jobs.


Why cable sizing matters more on commercial sites

On a small rooftop, cable runs are short and the current is modest. On a commercial site, you're often dealing with long runs across large rooftops, multiple inverters, and significant current. That combination makes cable sizing a real engineering decision, not an afterthought.

Every metre of cable has resistance, and that resistance turns some of your generated energy into heat instead of usable power. On a system running from 6.6kW up into the MW range, those losses compound over years of operation.

What voltage drop actually is

Voltage drop is the reduction in voltage as power travels along a cable from one point to another. Think of it like water pressure falling off the further you are from the pump. The energy doesn't disappear into nothing useful, it's lost as heat in the conductor.

In a solar system you care about voltage drop on both the DC side (panels to inverter) and the AC side (inverter to switchboard or point of connection). Australian wiring standards set limits on acceptable voltage drop, and a well-designed system usually aims to stay comfortably inside them rather than scrape the maximum.

The factors that drive cable size

Cable sizing balances several variables at once. Bump one up and another may need to change. The point of a proper design is to find the cable that carries the current safely, keeps voltage drop acceptable, and doesn't blow the budget on copper you don't need.

This is also where installation conditions matter. Cable in a hot roof cavity, bundled with other cables, or run through conduit behaves differently from cable in free air. Those conditions affect the cable's current-carrying capacity and have to be factored in, not assumed.

Getting it wrong: what it costs you

Undersized cable has two problems. First, it drops more voltage, which means less of your generated energy reaches the point where you use or export it. Over the life of the system that quiet loss can add up to a meaningful amount.

Second, and more serious, undersized cable can run hotter than it should, which is a safety and compliance issue. Oversizing has the opposite trade-off: it reduces losses but costs more upfront. The right answer is a deliberate design that weighs both, rather than defaulting to the cheapest cable that technically passes.

How this ties into battery and energy arbitrage

If you're adding a battery and running AI-driven energy arbitrage, where the battery charges when power is cheap and discharges or exports when it's dear, cable losses matter on the way in and the way out. Energy you lose to a poorly sized cable is energy you can't store or sell back.

Designing the cabling properly from the start protects the returns you're chasing with arbitrage. It's one of the less visible details that separates a system that performs on paper from one that performs on the meter.

Design it once, with the full site in front of you

Accurate cable sizing comes from the actual site: the run lengths, the roof conditions, the switchboard location, the connection point and the way you use power across the day. Generic rules of thumb only get you so far on a commercial job.

Our in-house team handles the design and the install under the one roof, CEC and SAA accredited, so the cabling is sized against your real conditions rather than a template. If you're planning a commercial solar or battery system, a site review is the sensible place to start the conversation.

The short version

Undersized cable costs you energy every single day the sun shines, and no amount of good panels will fix a bad cable run.

Want the numbers for your site?

We design, install and deliver commercial solar, battery and AI-driven energy systems Australia-wide — in-house, no subcontractors. A site review models your real load and tariff to show what's actually worth it.

Book a Site Review

More: browse all guides · see our projects