Industries
Solar and Battery for Refrigerated Transport Depots
Refrigerated transport depots run hard around the clock, and the electricity bill shows it. Solar, battery storage and smart controls can take a serious bite out of those costs while keeping your cold chain reliable.
Why refrigerated depots are a strong fit for solar
Reefer depots carry a heavy, steady electrical load. Cold rooms, blast freezers, dock refrigeration and plugged-in trailers all draw power day and night, which means your site is paying for energy during the exact daylight hours solar produces most.
That overlap between generation and demand is what makes solar worthwhile here. Instead of exporting excess back to the grid for little return, a depot can self-consume most of what it generates, directly offsetting the power that would otherwise come off your tariff.
- High, continuous base load from refrigeration plant
- Daytime demand that lines up with solar production
- Large flat or low-pitch roofs suited to rooftop arrays
- Yard and canopy space for additional mounting where roofs are limited
Where battery storage changes the picture
Refrigeration doesn't stop when the sun goes down, so a solar-only system leaves your overnight and early-morning load exposed to grid pricing. Adding a battery lets you store surplus daytime generation and draw on it through the evening peak and the overnight run.
Batteries also help with demand charges. Refrigeration start-up and simultaneous compressor loads can spike your peak demand, and a battery can shave those spikes so you're not billed on a short burst of high draw.
- Shift stored solar into evening and overnight operation
- Reduce peak demand charges from compressor start-up
- Hold power in reserve for critical cold-chain loads
- Firm up supply on sites with a weaker grid connection
AI energy arbitrage for round-the-clock operations
This is where ATI's approach differs. Our AI-driven energy arbitrage treats your battery as a trading asset: it charges when grid power is cheap, discharges when prices climb, and can export when the market makes it worthwhile.
For a depot running 24/7, that intelligence matters. The system reads your tariff and conditions and makes decisions around the clock, so your refrigeration keeps running on the lowest-cost energy available at any moment. The actual benefit depends on your tariff, network and load profile, which is exactly what a site review is for.
Protecting the cold chain
Any energy upgrade at a reefer depot has to respect one rule: product temperature cannot be put at risk. A properly designed system supports your refrigeration rather than competing with it.
Because ATI uses an in-house team and no subcontractors, the people designing the array, the switchboard work and the control logic are the same ones accountable for how it performs on your site. That matters when you're integrating with existing refrigeration plant and controls.
- Design around critical loads so cold storage stays prioritised
- Coordinate with existing refrigeration and monitoring systems
- CEC and SAA accredited installation and electrical work
- Metering and monitoring so you can see what the system is doing
Sizing and staging the system
Depots vary widely, so there's no single answer on system size. ATI works across a broad range, from small rooftop systems up to megawatt-scale commercial installs, and we scale the design to your roof area, load and budget.
If a full build isn't right just now, systems can often be staged. You might start with solar to cover daytime refrigeration, then add storage and arbitrage control as the case stacks up. We've delivered commercial rooftops like the 415kW array at DB Santasalo in Bulli, alongside projects for Garmin, Goldschmidt and others.
Getting the numbers for your site
The real figures for a refrigerated depot come from looking at your tariff, your interval data, your roof and your refrigeration load, not from a rule of thumb. Savings vary by site and network, and none of this is financial advice.
If you'd like to know what solar, battery and AI arbitrage could do for your depot, we can arrange a site review and model it against your actual usage. It's a straightforward first step with no obligation.
A well-sized solar and battery system lets a reefer depot generate its own power by day and buy cheap, dear or stored energy on its own terms.
Want the numbers for your site?
We design, install and deliver commercial solar, battery and AI-driven energy systems Australia-wide — in-house, no subcontractors. A site review models your real load and tariff to show what's actually worth it.
Book a Site ReviewMore: browse all guides · see our projects